BEAL

Accessory cords from 4 to 8 mm diameter conform to the requirements of the UIAA and EN564. Has a high tensile strength and can be used for prusiks, hauling, slings, tying gear together, or just for strapping a load to the top of your car. Perfect for attaching small items of kit.

Features:

• Static only
• Easy to tie and extremely resilient to pressure
  Beal recommends the double fisherman knot for making pruisk loops and tying cord ends together
• CE certified
• Diameter: 4 mm
• Weight per metre: 11 g
• Breaking load: 400 daN (kg)
• Knotted strength:530 daN (kg)
• Material: Nylon

Note: 1 unit = 1m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Accessory cords with a high tensile strength and can be used for prusiks, hauling, slings, tying gear together or just for strapping a load to the top of your car. This 3mm cord is perfect for attaching small items of kit.

Features:

• Static only
• Easy to tie and extremely resilient to pressure
• Beal recommends the double fisherman knot for making pruisk loops and tying cord ends together
• CE certified
• Diameter: 3mm
• Weight per metre: 6.5g
• Breaking load: 180daN (kg)
• Material: Nylon

Note: 1 unit = 1m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Accessory cords with a high tensile strength and can be used for prusiks, hauling, slings, tying gear together or just for strapping a load to the top of your car. This 2mm cord is perfect for attaching small items of kit, mending shoelaces or replacing tent guylines.

Features:

• Static only
• Easy to tie and extremely resilient to pressure
• Beal recommends the double fisherman knot for making pruisk loops and tying cord ends together
• CE certified
• Diameter: 2mm
• Weight per metre: 2.4g
• Breaking load: 70daN (kg)
• Material: Nylon
• Not suitable for load bearing

Note: 1 unit = 1m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Versatile cragging rope with a larger diameter to promote handling when belaying and increased abrasion resistance. Designed to be used for classic rock climbing.

Features:

• Dynamic rope
• Handling and compactness
• Easy to handle when belaying
• High abrasion resistance
• Impact force: 7.8 kN
• Number of falls: 8
• Sheath percentage: 33%
• Weight per metre: 66 g

Note: 1 unit = 1 m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Accessory cords from 4 to 8 mm diameter conform to the requirements of the UIAA and EN564. A nylon sheath with a nylon core accessory cord for a multitude of applications limited only by the imagination.

Features:

• Static only
• Uses:
• Attaching small items of kit
• Prusiks
• Hauling
• Slings
• Tying gear together
• Strapping a load to the top of your car
• Easy to tie and extremely resilient to pressure
• High tensile strength
• Diameter: 8 mm
• CE certified
• Weight per metre: 40 g
• Breaking load: 1530 daN (kg)
• Knotted strength: 2200 daN (kg)
• Material: Nylon

Note: 1 unit = 1 m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Very tough, this is the established standard rope for work at height. Rope for difficult area access. The 10.5 mm is one of the most common diameters used in Rope Access but is similarly popular as a caving rope or sports abseiling rope.

Features:

• Semi static rope
• Type: A
• Weight per metre: 65 g
• Breaking load: 3500 daN (kg)
• Sheath percentage: 38%
• Strength with sewn terminations: 2400 daN (kg)
• Beal ropes have individual unique codes which allows easy indentification at any time

Note: 1 unit = 1 m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Accessory cords from 4 to 8 mm diameter conform to the requirements of the UIAA and EN564. Has a high tensile strength and can be used for prusiks, hauling, slings, tying gear together, or just for strapping a load to the top of your car. 5 mm is perfect for attaching small items of kit.

Features:

• Static only
• Easy to tie and extremely resilient to pressure
• Diameter: 5mm - the first of the accessory cord diameters useful as a prusik cord
• The perfect prusik size for 10.5-11.2 mm ropes
• CE certified
• Weight per metre: 19.5 g
• Breaking load: 650 daN (kg)
• Knotted strength:930 daN (kg)
• Material: Nylon

Note: 1 unit = 1 m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Accessory cords from 4 to 8 mm diameter conform to the requirements of the UIAA and EN564. Rated over 1000 kgs and can be used as prusik on 13-16mm static line, mini-haul systems and even for emergency anchor set-ups (climbing) or in rescue applications. It’s also a really strong cord to tie things down.

Features:

• Static only
• Uses:
• Attaching small items of kit
• Prusiks
• Hauling
• Slings
• Tying gear together
• Strapping a load to the top of your car
• Easy to tie and extremely resilient to pressure
• High tensile strength
• Diameter: 7 mm
• CE certified
• Weight per metre: 31 g
• Breaking load: 1170 daN (kg)
• Knotted strength: 1680 daN (kg)
• Material: Nylon

Note: 1 unit = 1 m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Accessory cords from 4 to 8 mm diameter conform to the requirements of the UIAA and EN564. Has a high tensile strength and can be used for prusiks, hauling, slings, tying gear together, or just for strapping a load to the top of your car. It’s also great for mini-haul systems and is widely used in rescue kits.

Features:

• Static only
• Perfect for attaching small items of kit
• Easy to tie and extremely resilient to pressure
• Diameter: 6mm - useful as a prusik cord for 11 to 13 mm ropes
• CE certified
• Weight per metre: 23 g
• Breaking load: 810 daN (kg)
• Knotted strength: 1200 daN (kg)
• Material: Nylon

Note: 1 unit = 1m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Tubular tapes are supple and flexible and specifically used in belay slings. Cut webbing must always be tied with a tape knot.

Features:

• Width: 16 mm
• Standard: EN565
• Certification: CE/UIAA
• Weight per metre: 31g
• Breaking load: 1350daN (kg)
• Knotted strength: 1800daN (kg)
• Material: Nylon

Note: 1 unit = 1m of rope. Update quantity to the number of metres you require.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

At just 37 grams per metre, it takes up little room, but it is still dynamic enough to absorb modest impacts. Recommended for easy snow routes with no difficult passages, glacier travel and ski touring. If used for climbing, double it up.

Features:

• Markings each 12 metres to assist tieing-in
• Hybrid rope with UIAA test results passing it as a twin rope
• Single rope:
  • Impact force: 4.2kN
  • Number of falls: 5
• Twin rope:
  • Impact force: 8.5kN
  • Number of falls: 12
  • Sharp edge resistance
• Sheath percentage: 40%
• Weight per metre: 37g
• Total weight: 1.11kg

WARNING: use of a single rope is forbidden for climbing and mountaineering, but two strands of Rando rope is permitted.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

Technologies:

Unicore: An astonishing process, bonding rope sheath and core without affecting the rope’s suppleness. Even in the toughest conditions of use sheath slippage is suppressed.
If the sheath is cut or torn, sheath and core remain bonded together. With a standard rope, if the sheath is cut by abrasion over an edge, it slides and gathers over some metres. It then becomes impossible to pass this zone, either to ascend or to descend.
If the problem occurs near to the end of the rope the sheath may slide off completely resulting in a fall to the ground.
With the UNICORE process the sheath remains in place and the user may escape, either by descent or ascent, taking all necessary precautions.
The user is not stuck without a solution on the rope.

This detachable rappelling device allows you to descend on a single strand and retrieve the rope.

Features:

• Many uses for different disciplines such as multi-pitch sport routes, ridge scrambles, ski-mountaineering, canyoneering, etc
  
• Very light and compact and can be easily carried on the back of your harness
• Quick set-up
• Storage bag has instructions embroidered on it
• 100% textile construction
• Works on rope thickness of 7.3mm and up
• Weight: 140g

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

The Tiger 10mm is an example of multipurpose: in climbing it's the introductory rope for those starting to use thin ropes. Now benefitting from the new Unicore technology, it becomes the perfect rope for all adventures. For experienced climbers.

Features:

• Diameter adapted to fit all autolock belay devices diameter
• Easy to clip and to manipulate
• The rope sheath doesnt bunch and remains supple for the long term
• Has all the benefits of the Unicore technology
• Diameter: 10mm
• Length: 50m
• Impact force: 7.6kN
• Number of falls: 7
• Sheath percentage: 40%
• Weight per metre: 61g
• Total Weight: 3.05kg
• Sharp edge resistance

Technologies:

Dry Cover: A process whereby every individual sheath strand receives a chemical treatment before the rope is manufactured. The treatment is hydrophobic, increases abrasion resistance and is polymerised at high temperatures. The polymerisation process together with every strand being coated individually increases the life of the treatment.

Unicore: An astonishing process, bonding rope sheath and core without affecting the rope’s suppleness. Even in the toughest conditions of use sheath slippage is suppressed.
If the sheath is cut or torn, sheath and core remain bonded together. With a standard rope, if the sheath is cut by abrasion over an edge, it slides and gathers over some metres. It then becomes impossible to pass this zone, either to ascend or to descend.
If the problem occurs near to the end of the rope the sheath may slide off completely resulting in a fall to the ground.
With the UNICORE process the sheath remains in place and the user may escape, either by descent or ascent, taking all necessary precautions.
The user is not stuck without a solution on the rope.

Thermo Fluid: An infrared treatment which stabilises the sheath fibers and therefore makes yarns more homogeneous. The result is a more compact, better handling rope.

Please note: In the interest of safety, we cannot accept the return of safety and personal protective equipment.

The great classic for adventure climbing. Light and free-running for ease of use on long routes, on the crag and in the Alps. Technical and robust enough to sustain the most difficult loadings, it is even better today because it now benefits from all the advantages of the UNICORE technology.

Features:

• Dry Cover technology
  
• Unicore technology
• Excellent compromise between strength and lightness
• Low impact force and raised number of falls sustained
• Doesn’t bunch up and remains supple for the long term
• Allows escape by abseil even if the sheath is cut
• 60 meters long
  
• Rating: Half rope, 5.4 KN
• Diameter: 8.6 mm
• Weight: 49 g/m
• Type: Double rope
• Materials: Polyamide
• Number of falls: 15
• Elongation at first fall 35%
• Sharp edge resistance
  

Technologies:

Unicore: An astonishing process, bonding rope sheath and core without affecting the rope’s suppleness. Even in the toughest conditions of use sheath slippage is suppressed.
If the sheath is cut or torn, sheath and core remain bonded together. With a standard rope, if the sheath is cut by abrasion over an edge, it slides and gathers over some metres. It then becomes impossible to pass this zone, either to ascend or to descend.
If the problem occurs near to the end of the rope the sheath may slide off completely resulting in a fall to the ground.
With the Unicore process the sheath remains in place and the user may escape, either by descent or ascent, taking all necessary precautions.
The user is not stuck without a solution on the rope.

Dry Cover: A process whereby every individual sheath strand receives a chemical treatment before the rope is manufactured. The treatment is hydrophobic, increases abrasion resistance and is polymerised at high temperatures. The polymerisation process together with every strand being coated individually increases the life of the treatment.